Ξή±£³ΦΌάΞήΔΪΘ¦ΉφΥλΦα³Π

Needle Roller Bearings without Inner Ring and Cage

RNAV40 Ο΅ΑΠ

‘‘

ΦαΎΆ ΠΝΊΕ ΦΨΑΏ ³ί΄η »ω±ΎΆξΆ¨ΤΨΊΙ Ό«ΟήΧͺΛΩ Τ­ΣΠΠΝΊΕ
Shaft Designation Mass Dimensions Basic Load Ratings Limiting Original
Diameter ‘‘ ‘‘ Fw D B r Ά―  Cr Ύ²  Cor Speed Designation
‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ Dynamic Static ‘‘ ‘‘
mm ‘‘ g ‘‘ ‘‘ ‘‘ min. kN kN rpm ‘‘
24.3 RNAV 4003 62 24.3 35 18 0.3 12.0 17.0 3400 4084103
28.7 RNAV 4004 114 28.7 42 22 0.6 14.5 29.6 3000 4084104
33.5 RNAV 4005 129 33.5 47 22 0.6 23.3 34.6 2600 4084105
40.1 RNAV 4006 193 40.1 55 25 1.0 28.5 46.9 2000 4084106
45.9 RNAV 4007 259 45.9 62 27 1.0 33.5 59.9 1800 4084107
51.6 RNAV 4008 304 51.6 68 28 1.0 35.9 67.0 1700 4084108
57.4 RNAV 4009 390 57.4 75 30 1.0 41.3 74.0 1500 4084109
62.1 RNAV 4010 426 62.1 80 30 1.0 42.8 88.9 1400 4084110
69.8 RNAV 4011 645 69.8 90 35 1.1 48.9 109.0 1300 4084111
74.6 RNAV 4012 ‘ͺ‘ͺ 74.6 95 35 1.1 50.7 116.0 1100 4084112
80.3 RNAV 4013 692 80.3 100 35 1.1 59.6 126.0 1000 4084113
88 RNAV 4014 982 88 110 40 1.1 72.4 155.0 950 4084114
92.7 RNAV 4015 1025 92.7 115 40 1.1 74.1 164.0 900 4084115
100.3 RNAV 4016 ‘ͺ‘ͺ 100 125 45 1.1 82.3 174.1 900 4084116
104.8 RNAV 4017 ‘ͺ‘ͺ 105 130 45 1.1 ‘ͺ‘ͺ ‘ͺ‘ͺ 900 4084117
Λ΅Γχ£Ί ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘
1.±νΦΠΛωΑΠ»ω±ΎΆξΆ¨ΤΨΊΙ‘’Ό«ΟήΧͺΛΩΊΝΦΨΑΏ£¬½φΉ©Ρ‘Τρ²ΞΏΌΣΓ‘£ ‘‘ ‘‘
2.Φ¬Θσ»¬Κ±£¬Ό«ΟήΧͺΛΩΞͺ±νΑΠΚύΦ΅΅Δ60%‘£ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘
‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘
Note: ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘
1.These load, speed and mass is reference of choice only.   ‘‘
2.With grease lubrication, 60% of these limiting speed will apply. ‘‘