‘‘

ΝΖΑ¦ΉφΥλΦα³Π

Thrust Needle Roller

AXW‘­ Ο΅ΑΠ

‘‘

‘‘

ΦαΎΆ ΠΝΊΕ ΦΨΑΏ ³ί΄η »ω±ΎΆξΆ¨ΤΨΊΙ Ό«ΟήΧͺΛΩ ΝΖΑ¦΅ζΘ¦
Shaft Designation Mass Dimensions Basic Load Ratings Limiting Thrust Washer
Diameter ‘‘ ‘‘ Dc1 D1 D  B B1 Ά―  Cr Ύ²  Cor Speed AS LS
‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ Dynamic Static ‘‘ ‘‘ ‘‘
mm ‘‘ g ‘‘ ‘‘ ‘‘ ‘‘ min. kN kN rpm ‘‘ ‘‘
10 AXW 10 8.5 10 14 27 3.2 3.0 9.2 25.5 6000 AS 1024 LS 1024
12 AXW 12 9.0 12 16 29 3.2 3.0 9.9 29.0 5500 AS 1226 LS 1226
15 AXW 15  10.0 15 21 31 3.2 3.5 11.3 36.0 4200 AS 1528 LS 1528
17 AXW 17  11.0 17 23 33 3.2 3.5 11.9 39.5 3800 AS 1730 LS 1730
20 AXW 20  14.0 20 26 38 3.2 3.5 13.1 46.5 3600 AS 2035 LS 2035
25 AXW 25  20.0 25 32 45 3.2 4.0 14.7 58.0 3100 AS 2542 LS 2542
30 AXW 30  22.0 30 37 50 3.2 4.0 16.3 70.0 2600 AS 3047 LS 3047
35 AXW 35  27.0 35 42 55 3.2 4.0 17.8 81.0 2300 AS 3552 LS 3552
40 AXW 40   39.0 40 47 63 4.2 4.0 28.0 114.0 1900 AS 4060 LS 4060
45 AXW 45  44.0 45 52 68 4.2 4.0 30.0 128.0 1700 AS 4565 LS 4565
50 AXW 50  49.0 50 58 73 4.2 4.5 32.0 143.0 1500 AS 5070 LS 5070
Λ΅Γχ£Ί ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘
1.±νΦΠΛωΑΠ»ω±ΎΆξΆ¨ΤΨΊΙ‘’Ό«ΟήΧͺΛΩΊΝΦΨΑΏ£¬½φΉ©Ρ‘Τρ²ΞΏΌΣΓ‘£ ‘‘ ‘‘ ‘‘ ‘‘
2.Φ¬Θσ»¬Κ±£¬Ό«ΟήΧͺΛΩΞͺ±νΑΠΚύΦ΅΅Δ25%‘£ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘
‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘
Note: ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘

1.These load, speed and mass is reference of choice only.  

 ‘‘ ‘‘ ‘‘ ‘‘
‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘

2.With grease lubrication, 25% of these limiting speed will apply.

 ‘‘ ‘‘ ‘‘