‘‘

ΝΖΑ¦ΉφΥλΊΝ±£³ΦΌάΧιΌώ

Thrust Needle Roller and Cage Assemblies

AXK‘­,AS‘­ Ο΅ΑΠ

                           

ΦαΎΆ ΠΝΊΕ ΦΨΑΏ ΝΖΑ¦΅ζΘ¦ ΦΨΑΏ ³ί΄η »ω±ΎΆξΆ¨ΤΨΊΙ Ό«ΟήΧͺΛΩ Τ­ΣΠΠΝΊΕ
Shaft Designation Mass Thrust Mass Dimensions Basic Load Ratings Limiting Original
Diameter ‘‘ ‘‘ Washer ‘‘ Dc1 Dc Dw B1 Ά―  Cr Ύ²  Cor Speed Designation
‘‘ ‘‘ ‘‘ ‘‘ ‘‘ d D ‘‘ ‘‘ Dynamic Static ‘‘ ‘‘
mm ‘‘ g ‘‘ g ‘‘ ‘‘ min. ‘‘ kN kN rpm ‘‘
15 AXK 1528 4 AS 1528 3 15 28 2 1 11.3 36.0 3600 889102
17 AXK 1730 4 AS 1730 4 17 30 2 1 11.9 39.5 3200 889103
20 AXK 2035 5 AS 2035 5 20 35 2 1 13.1 46.5 3100 889104
25 AXK 2542 7 AS 2542 7 25 42 2 1 14.7 58.0 2800 889105
30 AXK 3047 8 AS 3047 8 30 47 2 1 16.3 70.0 2300 889106
35 AXK 3552 10 AS 3552 9 35 52 2 1 17.8 81.0 2000 889107
40 AXK 4060 16 AS 4060 12 40 60 3 1 28.0 114.0 1700 889108
45 AXK 4565 18 AS 4565 13 45 65 3 1 30.0 128.0 1500 889109
50 AXK 5070 20 AS 5070 14 50 70 3 1 32.0 143.0 1400 889110
55 AXK 5578 28 AS 5578 18 55 78 3 1 38.0 186.0 1200 889111
60 AXK 6085 33 AS 6085 22 60 85 3 1 44.5 234.0 1100 889112
65 AXK 6590 35 AS 6590 24 65 90 3 1 46.5 255.0 1000 889113
70 AXK 7095 60 AS 7095 25 70 95 4 1 54.0 255.0 1000 889114
75 AXK 75100 61 AS 75100 27 75 100 4 1 55.0 265.0 950 889115

‘‘

Λ΅Γχ£Ί ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘
1.±νΦΠΛωΑΠ»ω±ΎΆξΆ¨ΤΨΊΙ‘’Ό«ΟήΧͺΛΩΊΝΦΨΑΏ£¬½φΉ©Ρ‘Τρ²ΞΏΌΣΓ‘£ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘
2.Φα³Π΅Δ±£³ΦΌάΘηΣΙΛάΑΟΦΖ³Ι£¬ΤΪΠΝΊΕΊσΌΣTN£¬ΤΚΠνΉ€ΧχΞΒΆΘ£Ί120‘ζΑ¬Πψ£¬150‘ζΑΩΚ±£¬180‘ζΆΜΖΪ‘£ ‘‘
3.Φ¬Θσ»¬Κ±£¬Ό«ΟήΧͺΛΩΞͺ±νΑΠΚύΦ΅΅Δ25%‘£ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘
‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘
Note: ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘ ‘‘
1.These load, speed and mass is reference of choice only.   ‘‘ ‘‘
2.If the cages are made of plastics, suffix "TN" is added to the bearing No.,the maximum allowable working 
  themperrature is 120‘ζ in continuous working ,150‘ζ in temporary working and 180‘ζ in short working.
3.With grease lubrication, 25% of these limiting speed will apply. ‘‘ ‘‘ ‘‘