滚珠丝杠支承座轴承
Thrust Angular Contact Ball Bearings

ZKLF系列

        

轴径 型号 重量  尺寸   节距   固定螺钉  基本额定载荷 极限转速
Shaft Designation Mass  Dimensions   t      Basic Load Ratings Limiting
Diameter     D B d1 D1 r r1 J d2 b l       动  Cr 静  Cor Speed
                                  Dynamic Static grease
mm   kg     -0.25 min. min. min. min.       min. 数量×t   数量 kN kN rpm
12 ZKLF 1255.2RS  0.37 12 55 25 25 33.5 0.3 0.6 42 6.5 3 17 3×120° M6 3 17.0 24.7 3800
  ZKLF 1255.2Z  0.37 12 55 25 25 33.5 0.3 0.6 42 6.5 3 17 3×120° M6 3 17.0 24.7 7600
15 ZKLF 1560.2RS  0.43 15 60 25 28 36.0 0.3 0.6 46 6.5 3 17 3×120° M6 3 17.9 28.0 3500
  ZKLF 1560.2Z 0.43 15 60 25 23 12.0 0.3 0.6 46 6.5 3 17 3×120° M6 3 17.9 28.0 7000
17 ZKLF 1762.2RS 0.45 17 62 25 23 12.0 0.3 0.6 48 6.5 3 17 3×120° M6 3 18.8 31.0 3300
  ZKLF 1762.2Z 0.45 17 62 25 25 14.0 0.3 0.6 48 6.5 3 17 3×120° M6 3 18.8 31.0 6600
20 ZKLF 2068.2RS  0.61 20 68 28 25 14.0 0.3 0.6 53 6.5 3 19 4×90° M6 4 26.0 47.0 3000
  ZKLF 2068.2Z 0.61 20 68 28 30 16.0 0.3 0.6 53 6.5 3 19 4×90° M6 4 26.0 47.0 5400
25 ZKLF 2575.2RS  0.72 25 75 28 30 16.0 0.3 0.6 58 6.5 3 19 4×90° M6 4 27.5 55.0 2600
  ZKLF 2575.2Z  0.72 25 75 28 32 20.0 0.3 0.6 58 6.5 3 19 4×90° M6 4 27.5 55.0 4700
30 ZKLF 3080.2RS 0.78 30 80 28 32 20.0 0.3 0.6 63 6.5 3 19 6×60° M6 6 29.0 64.0 2200
  ZKLF 3080.2Z 0.78 30 80 28 34 23.0 0.3 0.6 63 6.5 3 19 6×60° M6 6 29.0 64.0 4300
35 ZKLF 3590.2RS 1.13 35 90 34 34 23.0 0.3 0.6 75 8.5 3 25 4×90° M8 4 41.0 89.0 2000
  ZKLF 3590.2Z 1.13 35 90 34 40 25.0 0.3 0.6 75 8.5 3 25 4×90° M8 4 41.0 89.0 3800
40 ZKLF 40100.2RS 1.46 40 100 34 40 25.0 0.3 0.6 80 8.5 3 25 4×90° M8 4 43.0 101.0 1800
  ZKLF 40100.2Z 1.46 40 100 34 45 32.0 0.3 0.6 80 8.5 3 25 4×90° M8 4 43.0 101.0 3300
50 ZKLF 50115.2RS 1.86 50 115 34 45 32.0 0.3 0.6 94 8.5 3 25 6×60° M8 6 46.5 126.0 1500
  ZKLF 50115.2Z 1.86 50 115 34 50 40.0 0.3 0.6 94 8.5 3 25 6×60° M8 6 46.5 126.0 3000
60 ZKLF 60145.2Z 4.30 60 145 45 50 40.0 0.3 0.6 120 8.5 3 35 6×60° M8 8 84.0 214.0 3000
  ZKLF 70155.2Z 4.90 70 155 45 59 45.0 0.3 0.6 130 8.5 3 35 8×45° M8 8 88.0 241.0 2800
80 ZKLF 80165.2Z 5.30 80 165 45 59 45.0 0.3 0.6 140 8.5 3 35 8×45° M8 8 91.0 265.0 2700
90 ZKLF 90190.2Z 8.70 90 190 55 64 50.0 0.3 0.6 165 10.5 3 45 8×45° M10 8 135.0 395.0 2300
100 ZKLF 100200.2Z 9.30 100 200 55 64 50.0 0.3 0.6 175 10.5 3 45 8×45° M10 8 140.0 435.0 2150
说明:                                      
1.表中所列基本额定载荷、极限转速和重量,仅供选择参考用。                        
2.油润滑时,极限转速为表列数值增加30%,带密封的情况除外。                      
                                       
Note:                                      
1.These load, speed and mass is reference of choice only.                        
2.With an effective oil supply, the limiting speed can be increased by about 30%, except for
  sealed roller followers.